|
LUSK METALS &
PLASTICS
EQUIPMENT LIST
Do-All Vertical
band saw with 60" throat 60-2 Cutting
circles & rings to tolerance of .125".
Plate capacity -6" thick. Do-All Horizontal
band saw NC
4100 16"
round capacity to tolerance of
+/.020. Do-All Vertical
bandsaw with 48" throat HS-4816-T96 For
cutting straight cuts +.125/-.0 tolerance
on up to 16" thick plate x 48" backgauge x
102" length cuts. CTD Cutoff
saw A480 6"
round max. capacity. Tolerance to
+/-.005. CTD Manual
cutoff saw 5"
round capacity. Tolerance to
+/-.005. Niles
Mach. Manual-operated
plate saw 5' wide
x 5' backgauge. Tolerance to +/-.005 on
plate up to 1.250" thick. Metlsaw Computer-controlled plate
saw P44T3 4' wide
x 4' backgauge capacity holding tolerance
of +/-.005
on up to
3" thick plate. Metlsaw Computer-controlled plate
saw P514T2 5' wide
x 14' backgauge x 4" thick plate capacity.
Cutting tolerance of
+/-.005. Metlsaw Computer-controlled plate
saw P1272T6 12'
wide x 72" backgauge cutting up to 6"
thick plate. +/-.030
tolerance. Metlsaw Computer-controlled plate
saw R614T6 6' wide
x 14' backgauge cutting up to 6" thick
plate. Tolerance to
+/-.005. Metlsaw Computer-controlled
plate saw P672T4 6' wide
x 5' backgauge used for precision cutting
all types of plastics to +/-.005 tolerance
up to 4" thick. Amada 12'
shear with 40" backgauge - 12' auto.
stacker on rear Shear
11 ga. & thinner to tolerance of
+/-.030. Wysong 4'
shear with 4' auto. stacker Shear
12 ga. & thinner to tolerance of
+/-.030.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
